Trending Products

    Genuine Piaggio Red Brake Caliper Front/Rear

    Piaggio/Gilera/Vespa Original

    In stock

    £118.37 inc. VAT
    Add to basket
    Partnumber: 56087R - #P1997

    Vape DC Rectifier – Lambretta & Vespa

    Vape Ignition

    In stock

    £50.26 inc. VAT
    Add to basket
    Partnumber: 51008200 - BGM9403D

    Wilkinson Racing Main Bearing and Seal Kit 125/180

    Wilkinson Racing

    In stock

    £34.78 inc. VAT
    Add to basket
    Partnumber: WRBK001

    Viton Carb Mounting Rubber Stepped Type 40mm-35mm

    MB Scooters

    In stock

    £35.59 inc. VAT
    Add to basket
    Partnumber: MBP0327

    Malossi MHR Contrast/Torque Spring 125/180 2 Stroke

    Malossi

    In stock

    £10.14 inc. VAT
    Add to basket
    Partnumber: 2911478.W0

      Our Brands

        @wilkinsonracingcentre
        143 Posts
        2.8K Followers

        Wilkinson Racing

        Wilkinson Racing
        🏁UK 2-stroke road & race engines
        🛠Gilera • Vespa • Lambretta • Piaggio
        🔧Builds & restorations
        🏆Championship-winning

        Follow on Instagram
        101
        1

        325cc Lambretta dyno run 🚀
        Who can spot the peak HP on the screen? 👀👇

        #lambretta #casaperformance #2stroke #dyno #sipscootershop...

        Another batch of exhaust coming along 👨🏼‍🏭 #gilera #piaggio #exhaust #tigwelding #2stroke
        46
        0

        Another batch of exhaust coming along 👨🏼‍🏭

        #gilera #piaggio #exhaust #tigwelding #2stroke

        WR183 - 37HP 🚀 #gilera #2stroke #gilerarunner #wr183 #scooter
        574
        5

        WR183 - 37HP 🚀

        #gilera #2stroke #gilerarunner #wr183 #scooter

        Tomorrow morning’s delivery for one lucky customer. 🚀📦 #gilera #piaggio #2stroke #ottopuntounoracingparts
        639
        9

        Tomorrow morning’s delivery for one lucky customer. 🚀📦

        #gilera #piaggio #2stroke #ottopuntounoracingparts

        Over 10 years ago, we started fabricating these KX85 stainless manifold conversions for the Piaggio/Gilera Maxi. Never imagined they’d still be in demand a decade later, but when something works, it lasts 💪 Designed, built, and tested in-house. #piaggio #gilera #tigwelding #fabrication #maxiscooter
        436
        4

        Over 10 years ago, we started fabricating these KX85 stainless manifold conversions for the Piaggio/Gilera Maxi.
        Never imagined they’d still...

        Engine build coming along nicely 🔧 Precision measurements at every stage make the difference between an engine that runs — and one that lasts. #lambretta #enginebuild #casaperformance #snapon
        59
        0

        Engine build coming along nicely 🔧

        Precision measurements at every stage make the difference between an engine that runs —...

        A simple solution that makes a big improvement. We’ve been doing this for years to prevent oil blow-by. The last thing you want on a full new build or a fresh engine is oil from the exhaust covering everything. A sleeve is machined for the exhaust stub, TIG welded, sealing face skimmed, and it’s good to go — most commonly carried out on PM exhausts for autos. This was also the reason that we make sure all the exhausts we make have 2 x viton o-rings Small detail. Big difference. #2stroke #scooter #gilera #lambretta #piaggio #exhaust #fabrication
        51
        0

        A simple solution that makes a big improvement.

        We’ve been doing this for years to prevent oil blow-by.
        The last...

        A repair we do a lot 👨🏼‍🏭 Lambretta owners will know frames without bracing are prone to cracking around the engine mount. This one was caught early 👌 ✔️ Original weld and crack V’d out ✔️ Re-welded ✔️ Gusset made, added and TIG welded All that’s left now is a bit of prep and paint, then it’s back on the road where it belongs 🛵💨 #Lambretta #LambrettaRepair #ClassicScooters #TIGWelding #ScooterWorkshop #MetalWork
        40
        0

        A repair we do a lot 👨🏼‍🏭

        Lambretta owners will know frames without bracing are prone to cracking around the...

        WR – Group 4e Super Imola 186 🚀 Built to win. Built to last. Proven under race conditions. 🏁 Race Highlights: • Pole position on debut • 15 wins — over 50% of the season’s races • 2023 Group 4e Champion • 2023 ACU Overall Stock Champion 🔧 Engine Performance & Reliability: • 28 races / 28 finishes • Zero mechanical failures • No repairs required all season (aside from a minor off-track moment in practice) • Fresh engine built at season start • Full season completed without splitting the motor • Same piston & rings from first race to last • Proven in a highly competitive tuned class This is a season-long demonstration of correct clearances, smart component choices, and exceptional build quality, delivering consistent performance without compromise. Performance means nothing without reliability—and with a skilled, consistent rider like Justin Price, the results speak for themselves. #lambretta #scooterracing #casaperformance #acu #ottopuntouno_racing_parts #2stroke
        48
        1

        WR – Group 4e Super Imola 186 🚀

        Built to win. Built to last.
        Proven under race conditions.

        🏁 Race...

        🚀 EGIG 180 Motor Fitted & Setup for this PK125 ETS This tidy PK125 has just had a serious refresh with an Egig 180 & Mamba S fitted and dyno’d. ✅ Upgrades include: • Egig 180 engine & Mamba S — fitted & dyno setup • Full LED lighting • SIP performance cable kit • SIP digital speedometer • SIP tubeless rims with Mitas tyres A clean, sharp-looking scoot with the performance to match. ☑️ #Vespa #PK125 #Egig180 #egigperformance #2Stroke #SIPPerformance #VespaTuning #vespaindonesia
        49
        0

        🚀 EGIG 180 Motor Fitted & Setup for this PK125 ETS

        This tidy PK125 has just had a serious refresh...

        Preparation is key for us it always has been. We set the benchmark in the Gilera Runner scene years ago, and that same approach still drives every build today. Original 180 engine, refreshed and refined with a few beneficial upgrades while we were on the job. Staying true to our slogan: “Do it right or not at all.” #wilkinsonracing #gilera #piaggio #gileramalaysia #gilerarunner #2stroke
        109
        0

        Preparation is key for us it always has been.
        We set the benchmark in the Gilera Runner scene years ago,...

        Toronda 210cc Runner Motor Build 🚀 Built on Ottopuntouno billet casings, this setup includes: • Casings matched to the cylinder • CNC-machined reed valve adapter • Vforce 4 Reed Valve • WR Mechanical water-pump blanking kit installed Output: 50HP+ potential ⚡ One of only two Toronda 210cc units we’ve supplied in the UK. 🇬🇧 Please note: these engines are not available for sale and there are currently no plans for additional units. Customer’s chassis is still in progress, so no completed photos yet, but this motor is something special ☑️ #wilkinsonracing #torondaengineering #gilera #piaggio #gileramalaysia #ottopuntouno_racing_parts #2stroke
        433
        7

        Toronda 210cc Runner Motor Build 🚀

        Built on Ottopuntouno billet casings, this setup includes:
        • Casings matched to the cylinder...

        Piaggio Typhoon WR172 🚀 This one turned out nicely, not over the top, but still different from the rest. ☑️ Brief Spec: • Engine build • 31HP cylinder tune (no case work) • WR KX85 35mm inlet kit • WR transmission cooling scoop • Toronda engine brace • VX fork conversion • Malossi RS24 rear shock • Ottopuntouno 4-pot front caliper • Bodywork by Vexdesign Clean finish and a solid setup that performs as well as it looks. #PiaggioTyphoon #WR172 #torondaengineering #Malossi #wilkinsonracing #ottopuntouno_racing_parts
        144
        1

        Piaggio Typhoon WR172 🚀

        This one turned out nicely, not over the top, but still different from the rest. ☑️...

        Jamie’s Runner 183 – 39hp / 21.4ftlb 🚀 We built a fully loaded engine for Jamie and added a few upgrades while we were at it. A proper all-round performance setup with serious results on the dyno. Spec list: • 8.1 CNC Engine Casings • Wilkinson Racing Engine Brace (to suit 8.1) • Wilkinson Racing Cylinder Head Kit • Toronda 183 Cylinder – WR Tuned • 55 x 110 Crankshaft • Keihin 35mm Carb • Wilkinson Racing Exhaust • Original Ignition • 8.1 4-Piston Calipers (Front & Rear) • Malossi Whoop Discs (Front & Rear) • HEL Braided Brake Lines • Wheels powdercoated & new Mitas Tyres Another clean, fast, and properly built Runner ready for the customer 🏆 #wilkinsonracing #ottopuntouno_racing_parts #gilera #scooter #torondaengineering
        215
        1

        Jamie’s Runner 183 – 39hp / 21.4ftlb 🚀

        We built a fully loaded engine for Jamie and added a few...

        Vespa T5 172 engine refreshed • Stripped and vapour blasted • Powder coated components • New bearings, seals and gaskets • SIP crankshaft installed • Casing modified with Malossi reed valve kit Another job off the list 💪🏻 #vespa #sipperformance #malossi #wilkinsonracing
        50
        0

        Vespa T5 172 engine refreshed

        • Stripped and vapour blasted
        • Powder coated components
        • New bearings, seals and gaskets...

        - Wilkinson Racing: Your Trusted Partner for 2-Stroke Scooter Excellence

        At Wilkinson Racing, we bring a wealth of experience and passion to the world of scooters. With years of dedication to both road and racing scooters, as well as our own successful race team, we understand the intricacies of performance riding and the importance of top-quality parts and services.

        - Our Range of Spare Parts

        We stock a comprehensive range of spare parts for scooters, ensuring you receive the best quality components, from genuine to aftermarket and performance options. Our selection includes everything from essential maintenance items to high-performance racing parts, all sourced from reputable manufacturers to guarantee reliability and longevity.

        - Research & Development

        Our years of research and development, driven by our racing success, have taught us which parts to use and which to avoid. Through this experience, we’ve gained valuable knowledge that allows us to provide you with components that are truly worthy of the job.

        - Expert Tuning and Customisation

        Our tuning and customisation services are designed to transform your scooter to meet your specific needs. Whether you’re looking to enhance performance, improve aesthetics, or achieve both, our skilled technicians have the expertise to deliver outstanding results. We take pride in our meticulous attention to detail, ensuring that every modification meets the highest standards of craftsmanship.

        - Our Racing Heritage

        Our extensive background in racing sets us apart from the competition. We don’t just sell parts and services; we live and breathe racing. The achievements of our race team on the track are a testament to our commitment to excellence and our deep understanding of what it takes to deliver reliable, race-winning performance.

        This racing heritage informs everything we do, from the products we select to the services we provide.

        - Trusted by Riders

        Wilkinson Racing has built a reputation for trust and reliability in the scooter community. Our customers know they can depend on us for expert advice, high-quality products, and exceptional service. We are passionate about helping riders achieve their goals, Whether it’s winning races or enjoying a smoother, more powerful ride on the road, your end goal is our mission.

        - Based in Cleckheaton

        Located in Cleckheaton, West Yorkshire, we invite you to visit Wilkinson Racing and become part of our community. Experience the difference that true passion and expertise can make. Whether you need parts, tuning, or customisation services, with Wilkinson Racing, you’re not just a customer – you’re part of a winning team.